View AP9214L_8594134.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ap9 214l document number: ds 38413 rev. 1 - 2 1 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product single chip solution for 1 - cell li+ battery pack description the AP9214L is a single chip protection solution specially designed for 1 - cell li+ rechargeable battery pack application . the AP9214L includes a 1 - cell lion battery protection chip and dual n - ch, ultra low r ss(on) mosfet with common drain . t he AP9214L provides rich battery protection features and can turn - off the n - ch mosfet by detecting overcharge voltage/current, over discharge voltage/current, or load short circuit. the ap92 14l has built - in fixed delay time to save external components. the AP9214L is available in u - dfn 2535 - 6 package with two kinds of pin options . features ? high voltage cmos process, up to 30v (v dd to v m ) ? low quiescent current (+25c ) ? in normal mode, 3.0a (typ.), 4.5a (max.) , v dd = 3.5v ? in power - down mode, 0.1a (max.) ? high - accuracy voltage detection circuit ( + 25c) ? overcharge detection voltage: 3.5v to 4.5v (5mv steps) accuracy 25mv ? overcharge hysteresis voltage range: 0.1v to 0.4v (50mv steps) accurac y 50mv ? overdischarge detection voltage: 2.0v to 3.4v (10mv steps) accuracy 35mv ? overdischarge hysteresis voltage range: 0v to 0.7v (40mv steps) accuracy 65mv ? discharge overcurrent detection voltage: 0.05v to 0.32v (10mv steps) accuracy 15mv ? short curre nt detection voltage: 0.45v to 0.7v (50mv steps) accuracy 100mv ? charge overcurrent detection voltage: - 0.2v to - 0.05v (10mv steps) accuracy 15mv ? overcharger detection voltage: 8.0v (fixed) accuracy 2v ? overcharger release voltage: 7.3v (fixed) accuracy 2v ? built - in fixed detection delay time (+25c ), accuracy 20% ? power - down mode selectable (yes or no) ? 0v battery charge selectable (permission or inhibition) ? overcharge protection mode selectable (auto release or latch) ? totally lead - free & fully rohs compl iant (note s 1 & 2) ? halogen and antimony free. green device (note 3) pin assignments (top view) u - dfn2535 - 6 ( o ption 1) u - dfn2535 - 6 ( o ption 2) applications ? li+ rechargeable battery pack note s: 1 . no purposely added lead. fully eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds . 1 2 3 5 4 s 1 v s s v d d n c s 2 v m 6 e p 1 2 3 5 4 s 1 v s s v d d v m s 2 n c 6 e p
ap9 214l document number: ds 38413 rev. 1 - 2 2 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product typical applications circuit ( note 4 ) note : 4 . r1 and c1 are used to stabilize the supply voltage of the AP9214L. the recommended range of r1 value is 330 to 470 and c1 v alue is 10nf to 1 000nf, typical value is 100nf. r2 should be connected between p - to v m sense terminal to monitor the status of charger and the charge /discharge current. the r2 should be between 300 and 4k, typical value is 2.7 k. r1 and r2 are also used as current limit resistors if the battery or charger is connected reversely. pola rity reversing may cause the power consumption of r1 and r2 to go over their power dissipation rating, therefore r1 and r2 values should be selected appropriately for the actual application. if r2 is more than 4k resistor, charge may not be off due to the voltage drop on r2. for power - down mode, w hen first connecting AP9214L system board to the battery, it is necessary to use charger or to short p - to the battery negative polarity. once the AP9214L is activated, the charger or connection can be removed, ot herwise the battery cannot discharge current through system board. the values selected should follow the recommended typical range mentioned above. it has not been confirmed whether the operation is normal or not in circuits other than the above example of connection. in addition, the example of connection shown above and the typical value do not exactly guarantee proper operation. please p erform the actual application to set the suitable value through your complete evaluation. pin description s pin num ber option 1 pin number option 2 p in n ame function 1 1 s1 source pin of discharging mosfet, connecting this pin to battery negative pole. 2 2 v ss negative p ower supply pin . 3 3 v dd positive p ower supply pin , connecting this pin to battery positive pole through r1 . 4 5 vm c harger negative input pin, short this pin to s2 pin through r2 . 5 4 nc not connected, leave this pin floating . 6 6 s2 source pin of charging mosfet, connecting this pin to charge negative input. ep ep d rain thermal pad is common dra in of charge and discharge mosfet, so in pcb layout, prefer to use large copper area to cover this pad for better thermal dissipation, then leave it open. a (b) a for pi n - out option 1 b for pin - out option 2 u 1 a p 9 2 1 4 l ( u - d f n 2 5 3 5 - 6 ) b a t p + c 1 1 0 0 n r 2 2 . 7 k p - v d d v s s s 1 s 2 v m 1 ( 1 ) 2 ( 2 ) 3 ( 3 ) 4 ( 5 ) 6 ( 6 ) r 1 3 3 0 t o 4 7 0
ap9 214l document number: ds 38413 rev. 1 - 2 3 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product functional block diagram a (b) a for pi n - out option 1 b for pin - out option 2 l o g i c c i r c u i t l o g i c c i r c u i t d e l a y t i m e c i r c u i t 0 v c h a r g e o p t i o n l e v e l s h i f t r v m d r v m s s 1 s 2 d 2 d 1 g 1 g 2 v d d v s s s 2 s 1 v m d r a i n e p 4 ( 5 ) 1 ( 1 ) 6 ( 6 ) 2 ( 2 ) 3 ( 3 )
ap9 214l document number: ds 38413 rev. 1 - 2 4 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product absolute maximum ratings ( notes 5 & 6 ) symbol parameter ratings unit v ds supply voltage ( between v dd and v ss ) - 0.3 to 12 v v dm charge input voltage ( between v dd and v m for protection chip ) - 0.3 to 24 v v dss mosfet drain - to - source voltage 24 v v gss mosfet gate - to - source voltage 12 v i d continuous drain current, v gs = 4.5v, t a = + 25 c 9.0 a continuous drain current, v gs = 4.5v, t a = + 70 c 7.1 a p d power dissipation 1000 mw t j maximum junction temperature + 150 c t st g storage temperature range - 6 5 to + 15 0 c notes : 5 . stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. these are stress rating s only and functional operation of the device at these conditions is n ot implied. exposure to absolute - maximum - rated conditions for extended periods may affect device reliability. 6 . ratings apply to ambient temperature at + 25c. the jedec high - k board design used to derive this data was a 2 inch x 2 inch m ultilayer board with 2 - ounce internal power and ground planes and 2 - ounce copper traces on the top and bottom of the board. recommended operating conditions s ymbol p arameter min max u nit v ds supply voltage ( between v dd and v ss ) 1.5 5.5 v v dm charge i nput voltage ( between v dd and v m ) - 0.3 5.5 v t a operating ambient temperature - 40 + 85 oc
ap9 214l document number: ds 38413 rev. 1 - 2 5 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product electrical characteristics (t a = +25 o c, v dd = 3.5v, v ss = 0v, r1 = 220?, r2 = 1.0k?, c1 = 100nf, unless otherwise specified . ) symbol parameter conditions min typ max unit s v cu overcharge detection voltage v cu - 0.025 v cu v cu + 0.025 v v cl overcharge release voltage v cl v cu v cl - 0.050 v cl v cl + 0.0 50 v v cl = v cu v cl - 0.025 v cl v cl + 0.025 v v dl overdischarge detection voltage v dl - 0.035 v dl v dl + 0.035 v v du overdischarge release voltage v du v dl v du - 0.10 0 v du v du + 0.10 0 v v du = v dl v du - 0.035 v du v du + 0.035 v v doc dischar ge overcurrent detection voltage v doc - 0.015 v doc v doc +0.015 v v short load short - c ircuiting detection voltage v short - 0.10 v short v short +0.10 v v coc charge overcurrent detection v oltage v coc - 0.015 v coc v coc +0.015 v i cc current consumption d uri ng operation v dd = 3.5v , v m = 0v 1.5 3.0 4.5 a i stb current consumption at power down v dd = 1.8v vm pin floating power down mode 0.1 a without power down mode (auto wake up) 5.5 a r vmd resistance b etween vm pin and vdd pin v dd = 1.8v , v m = 0v 150 300 500 k r vms resistance b etween vm pin and vss pin v dd = 3.5v , v m = 1.0v 10 30 50 k v 0cha 0v battery charge starting charge voltage 0v battery charging available 1.2 v v 0inh 0v battery charge inhibition battery voltage 0v battery charg ing unavailable 0.45 v v ovchg overvoltage charge detection voltage v dd = 3.5v 6.0 8.0 10.0 v v ovchgr overvoltage charge release voltage v dd = 3.5v 5.3 7.3 9.3 v t cu overcharge detection delay time t cu * 0.8 t cu t cu * 1.2 ms t cur overcharge rele ase delay time t cur * 0.8 t cur t cur * 1.2 ms t dl overdischarge detection delay time t dl * 0.8 t dl t dl * 1.2 ms t dlr overdischarge release delay time t dlr * 0.8 t dlr t dlr * 1.2 ms t doc discharge overcurrent detection delay time t doc * 0.8 t doc t d oc * 1.2 ms t docr discharge overcurrent release delay time t docr * 0.8 t docr t docr * 1.2 ms t short load short detection delay time t short * 0.8 t short t short * 1.2 s t coc charge over c urrent detection delay time t coc * 0.8 t coc t coc * 1.2 ms t coc r charge over c urrent release delay time t cocr * 0.8 t cocr t cocr * 1.2 ms
ap9 214l document number: ds 38413 rev. 1 - 2 6 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product electrical characteristics ( cont. ) ( t a = - 40 o c to + 85 o c, v dd = 3.5v, v ss = 0v, r1 = 220?, r2 = 1.0k?, c1 = 100nf, unless otherwise specified . ) symbol parameter conditions min typ max unit s v cu overcharge detection voltage v cu - 0.060 v cu v cu + 0.040 v v cl overcharge release voltage v cl v cu v cl - 0.080 v cl v cl + 0.065 v v cl = v cu v cl - 0.060 v cl v cl + 0.040 v v dl overdischarge detection voltage v dl - 0. 080 v dl v dl + 0. 080 v v du overdischarge release voltage v du v dl v du - 0.150 v du v du + 0.190 v v du = v dl v du - 0. 080 v du v du + 0. 080 v v doc discharge overcurrent detection voltage v doc - 0.021 v doc v doc +0.024 v v short load short dete ction voltage v short - 0.34 v short v short +0.34 v v coc charge o ver current d etection v oltage v coc - 0.040 v coc v coc +0.040 v i cc current consumption d uring operation v dd = 3.5v , v m = 0v 1.0 3.0 7.0 a i stb current consumption at power down v dd =1.8v vm pin floating power down mode 1.0 a without power down mode (auto wake up) 8 a r vmd resistance b etween vm pin and vdd pin v dd = 1.8v , v m = 0v 100 300 650 k r vms resistance b etween vm pin and vss pin v dd = 3.5v , v m = 1.0v 5 30 65 k v 0cha 0 v battery charge starting charge voltage 0 v battery charging available 1. 2 v v 0inh 0v battery charge inhibition battery voltage 0 v battery charging unavailable 0.3 v v ovchg overvoltage charge detection voltage v dd = 3.5v 5.5 8.0 10.5 v v ovch gr overvoltage charge release voltage v dd = 3.5v 5.0 7.3 9.5 v t cu overcharge detection delay time t cu * 0.6 t cu t cu * 1.4 ms t cur overcharge release delay time t cur * 0.6 t cur t cur * 1.4 ms t dl overdischarge detection delay time t dl * 0.6 t dl t dl * 1.4 ms t dlr overdischarge release delay time t dlr * 0.6 t dlr t dlr * 1.4 ms t doc discharge overcurrent detection delay time t doc * 0.6 t doc t doc * 1.4 ms t docr discharge overcurrent release delay time t docr * 0.6 t docr t docr * 1.4 ms t short loa d short detection delay time t short * 0.6 t short t short * 1.4 s t coc charge overcurrent detection delay time t coc * 0.6 t coc t coc * 1.4 ms t cocr charge overcurrent release delay time t cocr * 0.6 t cocr t cocr * 1.4 ms
ap9 214l document number: ds 38413 rev. 1 - 2 7 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product electrical characteristics ( cont. , n ote s 7 , 8 ) ( t a = +25 o c, v dd = 3.5v, v ss = 0v, r1 = 220 ? , r2 = 1.0k ? , c1 = 100nf, unless otherwise specified . ) symbol parameter conditions min typ max units i dss zero gate voltage drain current v ds = 20v, v gs = 0 1.0 a r ss(on)1 static sourc e - source on - resistance 1 v dd = 4.0v , i d = 1.0a 1 0 1 3 16 m r ss(on)2 static source - source on - resistance 2 v dd = 3.9v , i d = 1.0a 1 0 1 3.5 16.5 m r ss(on) 3 static source - source on - resistance 3 v dd = 3.0v , i d = 1.0a 1 1 1 4 17 m v sd diode forward voltage v gs = 0v , i s = 1a 0.75 1.0 v note s : 7 . in case of gate - source voltage of charging mosfet is 0v . in case of gate - source voltage of discharging mosfet is 0v . 8 . these specifications are guaranteed by design - will not be tested in production.
ap9 214l document number: ds 38413 rev. 1 - 2 8 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product application information operation mode 1. normal status the AP9214L monitors the battery voltage between the vdd pin and vss pin as well as the voltage difference between the vm pin and vss pin to control battery charging and d ischarging. when the battery voltage is between overdischarge detection voltage (v dl ) and overcharge detection voltage (v cu ) as well as the vm pin voltage is between th e charge overcurrent detection voltage (v coc ) and discharge overcurrent detection voltag e (v doc ), the AP9214L will turn on discharging and charging mosfe t. i n th ese condition s, the battery can charge and discharge freely . also, r vmd does not connect to vdd pin and r vms does not connect to vss pin in this status. 2. overcharge status if the battery voltage is more than v cu during charging status for the overcharge detection delay time (t cu ) or longer, the AP9214L turns off the charging mosfet to stop charging. r vmd and r vms are not connected in overcharge status. when vm pin voltage is low er than v doc and battery voltage falls below v cl , the AP9214L will release from overcharge status. when vm pin voltage is equal or more than v doc and battery voltage falls below v cu , the AP9214L will release from overcharge status. 3. overdischarge stat us if the battery voltage is less than v dl during discharging status for the overdischarge detection delay time (t dl ) or longer, the AP9214L turns off the discharging mosfet to stop discharging. in overdischarge status, r vmd is connected to vdd and vm pin voltage is pulled u p to vdd by r vmd , but r vms is not connected . for power - down mode version, the AP9214L recovers normal status from overdischarge status only by charg ing the b attery through the charger . when vm pin voltage to vss pin voltage is less t han typical - 0.7v and the battery voltage rises over v dl , the AP9214L will release from overdischarge status . i f vm pin voltage to vss pin voltage is higher than typical - 0.7v, the AP9214L will release from overdischarge status until the battery voltage ri ses over v du . for auto - wake - up version AP9214L a , the device recovers to normal status from overdischarg e status if either of these two conditions are satisfied : if charger is connected: the AP9214L a overdischarge status is released in the same way as des cribed above in AP9214L o verdischarge status section. if no charger is connected: 1) the battery voltage reaches the overdischarge release voltage (v du ) or higher; 2) maintains continuous time more than o verdischarge release delay time t dlr . 4. disch arge overcurrent and short current status when battery is in discharge over current status, if the voltage of the vm pin to vss pin is equal or more than v doc to v short and detection lasts for the discharge overcurrent detection delay time (t doc ) or longer , the AP9214L turns off the discharging mosfet to stop discharging. when the battery is in short current status, if the voltage of the vm pin to vss pin is equal to or more than v short , and the detection lasts for the short current detection delay time o r longer , the AP9214L turns off the discharg e mosfet to stop discharging. in discharge overcurrent or short current status, r vms is connected to vss but r vmd is not connected. the voltage of vm pin is almost equal to v dd as long as the load is connected. when the load is disconnected, the voltage of vm pin will become almost equal to vss ( due to r vms being connected ) and then the AP9214L will release from discharge overcurrent or short current status . 5. charge overcurrent status when the battery is in charge over current status, if the voltage of the vm pin to vss pin is equal to or less than v coc and the detection continues for the charge overcu rrent detection delay time (t coc ) or longer, the AP9214L turns off the charging mosfet to stop charging. 6. 0v battery charging function (option al ) this function is available as an option and can be factory set internally. the AP9214L has this function built in. 0v charging function permits charger to recharge the battery whose voltage is 0v due to self - dischar ge. if 0v charging function is not present, the device will prevent charger to recharge the battery whose voltage is 0v due to self - discharge. (if a device without 0v charging function is needed, please contact diodes sales team . )
ap9 214l document number: ds 38413 rev. 1 - 2 9 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product application information ( cont. ) 7. over v oltag e charger detection circuit this function is used to monitor the charger vo ltage between the vdd pin and vm pin, and when this voltage exceeds overvoltage charger detection voltage (8.0v typ.), the AP9214L will turn off charging mosf et, when this voltage drops below overvoltage charger release voltage (7.3v typ.), it then turns on charging mosfet. there is no delay time set ting for detection and release. 8. power - down mode or auto - wake - up function ( option al) in device with power - down function, during p ower - down mode, device enters the overdischarge status. the ic enters sleep mode and the current consumption becomes very low , typically 0.1 a . to release from power - down status to the normal status, charger connection is required. in device with auto - wakeup mode, t he ic remains active in the o verdischarge state. the ic is released into the normal state by the operation that increases the bat tery voltage more than o verdischarge release voltage.
ap9 214l document number: ds 38413 rev. 1 - 2 10 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product application information (tim ing chart) 1. overcharge and overdischarge detection v c u v c l v d l v d u v d d v s s v s s v d d v v m v d d v d o c v s s v p - v c o c v d d d o c o v m 2 1 r e d l i n e i s f o r n o s h u t d o w n m o d e v e r s i o n 1 : t d l 2 : t c u 3 : t c u r 4 : t d l r 2 1 s 1 s 1 s 2 s 2 3 4 3 3 s 1 : c h a r g e r c o n n e c t i o n s 2 : l o a d c o n n e c t i o n p 1 : r v m d p u l l - u p c o n n e c t i o n p 1 p 1
ap9 214l document number: ds 38413 rev. 1 - 2 11 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product application information (tim ing chart) ( cont. ) 2. discharge overcurrent d etection v c u v c l v d l v d u o n v s s o f f o n o f f v d d v s h o r t v s s v d o c v d d d o c o v m 1 2 s 1 s 2 1 : t d o c 2 : t s h o r t 3 : t d o c r s 1 : c o n n e c t o v e r c u r r e n t l o a d s 2 : c o n n e c t s h o r t c u r r e n t l o a d p 1 : r v m s p u l l - d o w n c o n n e c t i o n 3 3 p 1 p 1 1
ap9 214l document number: ds 38413 rev. 1 - 2 12 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product application information (tim ing chart) ( cont. ) 3. c harge overcurrent detection v c u v c l v d l v d u v d d v s s v s s v d d v v m v d d v s s v p - v c o c v d d d o c o v m 1 s 1 1 : t c o c 2 : t c o c r s 1 : c o n n e c t o v e r c u r r e n t c h a r g e r 2
ap9 214l document number: ds 38413 rev. 1 - 2 13 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product ordering information (note 9 ) device package code packaging pin out 7 tape and reel quantity part number suffix AP9214L (x) - x - hsb - 7 h sb u - dfn 2 5 3 5 - 6 option 1 3 000/tape & reel - 7 AP9214L (x) - x - h sb r - 7 h sbr u - dfn 2 5 3 5 - 6 option 2 3 000/tape & reel - 7 voltage combination part number overcharge detection voltage v cu overcharge release voltage v cl overdischarge detection voltage v dl overdischarge release voltage v du discharge overcurrent detection voltage v doc load short detection voltage v short charge overurrent detection voltage v coc over voltage charger detec tion voltage v ovchg over voltage charger release voltage v ovchgr pow r - down function overcharge protection mode delay time 0v battery charge function ap921 4l( x ) - aa - hsb(x) - 7 4.375v 4.175v 2.500v 2.900v 0.150v 0.700v - 0.150v 8.0v 7.3v selectable auto r eleas e option 1 permission ap921 4l(x) - ab - hsb(x) - 7 4.425v 4.225v 2.500v 2.900v 0.150v 0.700v - 0.150v 8.0v 7.3v selectable auto r elease option 1 permission ap9214 l(x) - ac - hsb(x) - 7 4.375v 4.175v 2.500v 2.900v 0.095v 0.700v - 0.095v 8.0v 7.3v selectable auto r eleas e option 1 permission ap9214 l(x) - ad - hsb(x) - 7 4.375v 4.175v 2.500v 2.900v 0.120v 0.700v - 0.120v 8.0v 7.3v selectable auto r elease option 1 permission ap9214 l(x) - ae - hsb(x) - 7 4.200v 4.100v 2.500v 3.000v 0.300v 0.550v - 0.100v 8.0v 7.3v selectable auto r eleas e option 1 permission ap9214 l(x) - af - hsb(x) - 7 4.375v 4.175v 2.500v 2.900v 0.180v 0.700v - 0.180v 8.0v 7.3v selectable auto r elease option 1 permission ap9214 l(x) - ag - hsb(x) - 7 4.375v 4.175v 2.500v 2.900v 0.075v 0.700v - 0.075v 8.0v 7.3v selectable auto r eleas e option 1 permission ap9214 l(x) - ah - hsb(x) - 7 4.425v 4.225v 2.500v 2.900v 0.075v 0.700v - 0.075v 8.0v 7.3v selectable auto r elease option 1 permission ap9214 l(x) - a i - hsb(x) - 7 4.500v 4.300v 2.400v 2.800v 0.150v 0.700v - 0.075v 8.0v 7.3v selectable auto r eleas e option 1 permission ap9214 l(x) - a j - hsb(x) - 7 4.375v 4.175v 2.400v 2.800v 0.125 v 0.700v - 0.125v 8.0v 7.3v selectable auto r elease option 1 permission ap9214 l(x) - a k - hsb(x) - 7 4.250v 4.050v 2.400v 3.000v 0.150v 0.700v - 0.150v 8.0v 7.3v selectable auto r eleas e option 1 permission ap9214 l(x) - a l - hsb(x) - 7 4.275v 4.175v 2.300v 2.400v 0.180 v 0.700v - 0.180v 8.0v 7.3v selectable auto r elease option 1 permission ap9214 l(x) - a m - hsb(x) - 7 4.375v 4.175v 2.300v 2.400v 0.180 v 0.700v - 0.180v 8.0v 7.3v selectable auto r eleas e option 1 permission ap9214 l(x) - a n - hsb(x) - 7 4.225v 4.025v 3. 2 00v 3. 4 00v 0.06 0 v 0.450v - 0.0 6 0v 8.0v 7.3v selectable auto r elease option 1 permission a p 9 2 1 4 l x - x - x - x p r o d u c t c o d e v o l t a g e & d e l a y t i m e c o m b i n a t i o n c o d e h s b : u - d f n 2 5 3 5 - 6 ( p i n - o u t o p t i o n 1 ) h s b r : u - d f n 2 5 3 5 - 6 ( p i n - o u t o p t i o n 2 ) p a c k i n g 7 : t a p e & r e e l p o w e r d o w n m o d e b l a n k : y e s a : n o ( a u t o - w a k e - u p ) p a c k a g e p r o d u c t n a m e
ap9 214l document number: ds 38413 rev. 1 - 2 14 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product ordering information ( cont. ) (note 9 ) delay t ime combination part number overcharge detection delay t ime t cu overcharge release delay time t cur overdischarge detection delay time t dl overdischarge release delay time t dlr discharge overcurrent detection delay time t doc discharge overcurrent release delay time t docr charge overcurrent detection delay ti me t coc charge overcurrent release delay time t cocr load short detection delay time t short AP9214L (x) - xx - hsb(x) - 7 1.0s 2.0ms 115ms 2.0ms 10.0ms 2.0ms 10.0ms 2.0ms 320s note: 9. if products of any other voltage versions are needed, please contac t with the local sale s office. marking information y : y e a r : 0 t o 9 ( t o p v i e w ) x : a t o z : i n t e r n a l c o d e y w x x x ( x x x ) x x ( x x x ) : i d e n t i f i c a t i o n c o d e ( 2 ~ 5 c o d e s ) w : w e e k : a t o z : 1 t o 2 6 w e e k ; a t o z : 2 7 t o 5 2 w e e k ; z r e p r e s e n t s 5 2 a n d 5 3 w e e k
ap9 214l document number: ds 38413 rev. 1 - 2 15 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product marking information ( cont. ) part number package identification code AP9214La - aa - hsb - 7 u - dfn2535 - 6 14aa AP9214La - ab - hsb - 7 u - dfn2535 - 6 14ab AP9214La - ac - hsb - 7 u - d fn2535 - 6 14ac AP9214La - ad - hsb - 7 u - dfn2535 - 6 14ad AP9214La - ae - hsb - 7 u - dfn2535 - 6 14ae AP9214La - af - hsb - 7 u - dfn2535 - 6 14af AP9214La - ag - hsb - 7 u - dfn2535 - 6 s6 AP9214La - ah - hsb - 7 u - dfn2535 - 6 s8 AP9214La - ai - hsb - 7 u - dfn2535 - 6 14ai AP9214La - aj - hsb - 7 u - dfn2535 - 6 14aj AP9214La - ak - hsb - 7 u - dfn2535 - 6 14ak AP9214La - al - hsb - 7 u - dfn2535 - 6 14al AP9214La - am - hsb - 7 u - dfn2535 - 6 14am AP9214La - an - hsb - 7 u - dfn2535 - 6 14an AP9214La - aa - hsbr - 7 u - dfn2535 - 6 14aar AP9214La - ab - hsbr - 7 u - dfn2535 - 6 14abr AP9214La - ac - hsbr - 7 u - dfn2535 - 6 14acr AP9214La - ad - hsbr - 7 u - dfn2535 - 6 14adr AP9214La - ae - hsbr - 7 u - dfn2535 - 6 14aer AP9214La - af - hsbr - 7 u - dfn2535 - 6 14afr AP9214La - ag - hsbr - 7 u - dfn2535 - 6 r7 AP9214La - ah - hsbr - 7 u - dfn2535 - 6 rh AP9214La - ai - hsbr - 7 u - dfn2535 - 6 14air AP9214La - aj - hsbr - 7 u - dfn2535 - 6 14ajr AP9214La - ak - hsbr - 7 u - dfn2535 - 6 14akr AP9214La - al - hsbr - 7 u - dfn2535 - 6 14alr AP9214La - am - hsbr - 7 u - dfn2535 - 6 14amr AP9214La - an - hsbr - 7 u - dfn2535 - 6 14anr AP9214L - aa - hsb - 7 u - dfn2535 - 6 14a AP9214L - ab - hsb - 7 u - dfn2535 - 6 14b AP9214L - ac - hsb - 7 u - dfn2535 - 6 14c AP9214L - ad - hsb - 7 u - dfn2535 - 6 14d AP9214L - ae - hsb - 7 u - dfn2535 - 6 14e AP9214L - af - hsb - 7 u - dfn2535 - 6 14f AP9214L - ag - hsb - 7 u - dfn2535 - 6 x8 AP9214L - ah - hsb - 7 u - dfn2535 - 6 x9 AP9214L - ai - hsb - 7 u - dfn2535 - 6 14i AP9214L - aj - hsb - 7 u - dfn2535 - 6 14j ap9 214l - ak - hsb - 7 u - dfn2535 - 6 14k AP9214L - al - hsb - 7 u - dfn2535 - 6 14l AP9214L - am - hsb - 7 u - dfn2535 - 6 14m AP9214L - an - hsb - 7 u - dfn2535 - 6 14n AP9214L - aa - hsbr - 7 u - dfn2535 - 6 14ar AP9214L - ab - hsbr - 7 u - dfn2535 - 6 14br AP9214L - ac - hsbr - 7 u - dfn2535 - 6 14cr AP9214L - ad - hsbr - 7 u - dfn2535 - 6 14dr AP9214L - ae - hsbr - 7 u - dfn2535 - 6 14er AP9214L - af - hsbr - 7 u - dfn2535 - 6 14fr AP9214L - ag - hsbr - 7 u - dfn2535 - 6 14gr AP9214L - ah - hsbr - 7 u - dfn2535 - 6 14hr AP9214L - ai - hsbr - 7 u - dfn2535 - 6 14ir AP9214L - aj - hsbr - 7 u - dfn2535 - 6 14jr AP9214L - ak - hsbr - 7 u - dfn2535 - 6 14kr AP9214L - al - hsbr - 7 u - dfn2535 - 6 14lr AP9214L - am - hsbr - 7 u - dfn2535 - 6 14mr AP9214L - an - hsbr - 7 u - dfn2535 - 6 14nr
ap9 214l document number: ds 38413 rev. 1 - 2 16 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product package outline dimensions please see ap02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. u - dfn2535 - 6 ( type b) u - dfn2535 - 6 (type b) dim min max typ a 0.50 0.60 - a1 0.00 0.05 0.02 a3 - - 0.127 b 0.25 0.35 0.30 b2 1.05 1.15 1.10 d 2.45 2.55 2.50 d2 2.01 2.21 2.11 e 3.45 3.55 3.50 e2 2.20 2.40 2.30 e - - 0.55 e1 - - 0.95 l 0.25 0.35 0.30 z - - 0.15 all dimensions in mm suggested pad layout please see ap02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. u - dfn2535 - 6 (type b) dimensions value (in mm) c 0.550 c1 0.950 x 0.400 x1 1. 200 x2 2.210 y 0.500 y1 2.400 b2 e1 r0.150 z a a1 a3 seating plane d e e b (pin #1 id) d2 e2 l(x6) x x1 c c1 y1 x2 y
ap9 214l document number: ds 38413 rev. 1 - 2 17 of 17 www.diodes.com december 2015 ? diodes incorporated AP9214L new product important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this d ocument and any product described herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trad emark rights, nor the rights of others. any customer or user of this document or products described herein in such applicati ons shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represen ted on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthor ized sales channel. should customers purchase or use diodes in corporated products for any unintended or unauthorized application, customers shall indemnify and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may a lso be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of this document is the final and determinative fo rmat released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical components in life support devices or system s without the express written approval of the chief executive officer of diode s incorporated. as used herein: a. life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions f or use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree th at they are solely responsible for all legal, regulatory and safety - related requirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporat ed and its representatives against any damages arising out of the use of diodes incorporated products in such safety - criti cal, life support devices or systems. copyright ? 201 5 , diodes incorporated www.diodes.com

▲Up To Search▲

Price & Availability of AP9214L

	To Download AP9214L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .